设备名称 | Equipment name | 品名 / Brand name | 数量/Qty | 产地 | Made in |
三座标 | CMM | 海克斯康 / Hexagon | 4 | 瑞典 | Sweden |
影像检测仪 | 2D auto inspection | 万豪 / WANHAO | 2 | 台湾 | TaiWan |
高度计 | Height gauge | TESA | 4 | 瑞典 | Sweden |
千分尺/卡尺 | Micrometre/Caliper | 三丰 / Mitutoyo | 50 | 日本 | Japan |
粗糙度仪 | Roughness Tester | 三丰 / Mitutoyo | 1 | 日本 | Japan |
显微镜 | Microscope | 尼康 / Nikon | 25 | 日本 | Japan |
韦氏硬度计 | Hardness Tester(HW) | 天星/TianXin | 1 | 中国 | China |
洛氏硬度计 | Hardness Tester(HRC) | 得川/DeChuang | 1 | 中国 | China |
维氏硬度计 | Hardness Tester(HV) | 联尔/HV-1000 | 1 | 中国 | China |
邵氏硬度计D型 | Shore durometer(HD) | 山度/LX-D-2 | 1 | 中国 | China |
二维码检查仪 | 2D bar code tester | 基恩士 / KEYENCE SR-1000 | 1 | 日本 | Japan |
高斯计 | Gauss meter | 亨通/HT20 | 1 | 中国 | China |
数显式推拉力计 | Digital Push & Pull Tester | 爱德堡/HP-50 | 1 | 中国 | China |
表盘式推拉力计 | Dial push-pull meter | 爱德堡/NK-500 | 1 | 中国 | China |
色差仪 | colorimeter | 三恩时3nh/NR10QC | 1 | 中国 | China |
表面电阻测试仪 | Surface resistance tester | 驿生胜利/VICTOR 385 | 1 | 中国 | China |
数显磁导率仪 | Magnet permeability meter | 李斯特/Ferromaster | 1 | 德国 | Germany |
镀层膜厚仪 | Film thickness gauge | 里博/LT200TX-GX | 1 | 中国 | China |
高温炉 | High temp. furnace | 中达电炉 / ZhongDa | 1 | 中国 | China |
设备名称/Equipment name | 三座标 /CMM |
品名 / Brand name | 海克斯康 / Hexagon |
数量/Qty | 4 |
产地 /Made in | 瑞典 /Sweden |
设备名称/Equipment name | 影像检测仪 /D auto inspection |
品名 / Brand name | 万豪 / WANHAO |
数量/Qty | 2 |
产地 /Made in | 台湾 /TaiWan |
设备名称/Equipment name | 高度计 /Height gauge |
品名 / Brand name | TESA |
数量/Qty | 4 |
产地 /Made in | 瑞典 /Sweden |
设备名称/Equipment name | 千分尺/卡尺 /Micrometre/Caliper |
品名 / Brand name | 三丰 / Mitutoyo |
数量/Qty | 50 |
产地 /Made in | 日本 /Japan |
设备名称/Equipment name | 粗糙度仪 /Roughness Tester |
品名 / Brand name | 三丰 / Mitutoyo |
数量/Qty | 1 |
产地 /Made in | 日本 /Japan |
设备名称/Equipment name | 显微镜 /Microscope |
品名 / Brand name | 尼康 / Nikon |
数量/Qty | 25 |
产地 /Made in | 日本 /Japan |
设备名称/Equipment name | 韦氏硬度计 /Hardness Tester(HW) |
品名 / Brand name | 天星 / TianXin |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 洛氏硬度计 /Hardness Tester(HRC) |
品名 / Brand name | 得川 / DeChuang |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 维氏硬度计 /Hardness Tester(HV) |
品名 / Brand name | 联尔 /HV-1000 |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 邵氏硬度计D型 /Shore durometer(HD) |
品名 / Brand name | 山度 /LX-D-2 |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 二维码检查仪 /2D bar code tester |
品名 / Brand name | 基恩士 / KEYENCE SR-1000 |
数量/Qty | 1 |
产地 /Made in | 日本 /Japan |
设备名称/Equipment name | 高斯计 /Gauss meter |
品名 / Brand name | 亨通 /HT2 |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 数显式推拉力计 /Digital Push & Pull Tester |
品名 / Brand name | 爱德堡 /HP-50 |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 表盘式推拉力计 /Dial push-pull meter |
品名 / Brand name | 爱德堡 /NK-500 |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 色差仪 /colorimeter |
品名 / Brand name | 三恩时3nh /NR10QC |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 表面电阻测试仪 /Surface resistance tester |
品名 / Brand name | 驿生胜利 /VICTOR 385 |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 数显磁导率仪 /Magnet permeability meter |
品名 / Brand name | 李斯特 /Ferromaster |
数量/Qty | 1 |
产地 /Made in | 德国 /Germany |
设备名称/Equipment name | 镀层膜厚仪 /Film thickness gauge |
品名 / Brand name | 里博 /LT200TX-GX |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
设备名称/Equipment name | 高温炉 /High temp. furnace |
品名 / Brand name | 中达电炉 /ZhongDa |
数量/Qty | 1 |
产地 /Made in | 中国 /China |
三座标 三座标 CMM 离线3D编程,自动快速检测产品线性尺寸、几何公差、自动生成报告等 |
Three coordinate CMM Offline 3D programming, automatic and rapid detection of product linear dimension, geometric tolerance, automatic generation of report, etc. |
|
二次元 NCMM 自动检测平面尺寸及公差,特别适用于薄壁件。 |
Quadratic detector ncmm :Automatic detection of plane dimensions and tolerances, especially for thin-walled parts. |
|
TESA 高度计 用于工序中手动快速检测线性尺寸。 |
TESA altimeter It is used for manual and rapid detection of linear dimensions in the process. |
|
千分尺/卡尺 用于工序中手动快速检测线性尺寸。 |
Micrometer / caliper It is used for manual and rapid detection of linear dimensions in the process. |
|
粗糙度仪 高精度感应,精确检测表面光洁度。 |
Roughness tester High precision induction, accurate detection of surface finish. |
|
显微镜 卓越的光学性能,最大可放大至50倍。 |
Microscope Excellent optical performance, up to 50 times magnification. |
|
韦氏硬度计 铝合金专用硬度计,非常适于在生产现场对材料进行快速硬度检测。 |
Vickers hardness tester The special hardness tester for aluminum alloy is very suitable for rapid hardness testing of materials on the production site. |
|
洛氏硬度计 用于现场精确测热处理后、淬火后的高硬度材料硬度。 |
Rockwell hardness tester It is used to accurately measure high hardness materials after heat treatment and quenching on site. |
|
维氏硬度计 广泛应用于测定微小、薄壁件、表面镀层硬度。 |
Vickers hardness tester It is widely used to measure the hardness of micro, thin-walled parts and surface coatings. |
|
邵氏硬度计D型 硬橡胶、树脂、压克力、玻璃、热塑性橡胶、印刷板、纤维等。 |
Shore hardness tester type D Hard rubber, resin, acrylic, glass, thermoplastic rubber, printing board, fiber, etc. |
|
二维码检查仪 可检精确测出二维码的识别等级。 |
QR code checker It can detect and accurately measure the identification level of QR code. |
|
高斯计 检测出永磁体表面磁场强度。 |
Gauss meter The surface magnetic field strength of the permanent magnet is detected. |
|
数显式推拉力计 又名微型压力仪最大只能承受5kg的推拉力,适用于小型弹簧、弹片的拉力测试。 |
Digital display push-pull meter Also known as micro pressure gauge, it can only bear 5kg push and pull force at most. It is suitable for the tension test of small springs and shrapnel. |
|
表盘式推拉力计 最大可以承受50kg的推拉力,适用于胶水附着力、销钉装配力、大弹簧的推拉力等。 |
Dial push-pull meter It can bear the maximum pushing and pulling force of 50kg, which is suitable for glue adhesion, pin assembly force, pushing and pulling force of large spring, etc. |
|
色差仪 标准色和样品色差数值数据分析,更直观的表现出颜色差异。 |
colorimeter The analysis of numerical data of standard color and sample color difference shows the color difference more intuitively. |
|
表面电阻测试仪 用于量化测量所有导电型、抗静电及静电泄放材料的表面电阻或系统电阻。 |
Surface resistance tester It is used to measure the electrostatic resistance and discharge resistance of all conductive materials. |
|
数显磁导率仪 测量具有低磁导率的材料和工件,如SUS316L。 |
Digital permeability meter Measure materials and workpieces with low permeability, such as SUS316L. |
|
镀层膜厚仪 用来专业测量电镀、阳极镀层厚度的标准仪器。 |
Coating thickness gauge instrument for professional measurement of electroplating and anode coating thickness. |
|
高温炉 测试材料、工件、胶水、磁铁等的耐高温特性。 |
High temperature furnace Test the high temperature resistance of materials, workpieces, glues, magnets, etc. |
三座标 三座标 CMM 离线3D编程,自动快速检测产品线性尺寸、几何公差、自动生成报告等 |
Three coordinate CMM Offline 3D programming, automatic and rapid detection of product linear dimension, geometric tolerance, automatic generation of report, etc. |
二次元 NCMM 自动检测平面尺寸及公差,特别适用于薄壁件。 |
Quadratic detector ncmm :Automatic detection of plane dimensions and tolerances, especially for thin-walled parts. |
TESA 高度计 用于工序中手动快速检测线性尺寸。 |
TESA altimeter It is used for manual and rapid detection of linear dimensions in the process. |
千分尺/卡尺 用于工序中手动快速检测线性尺寸。 |
Micrometer / caliper It is used for manual and rapid detection of linear dimensions in the process. |
粗糙度仪 高精度感应,精确检测表面光洁度。 |
Roughness tester High precision induction, accurate detection of surface finish. |
显微镜 卓越的光学性能,最大可放大至50倍。 |
Microscope Excellent optical performance, up to 50 times magnification. |
韦氏硬度计 铝合金专用硬度计,非常适于在生产现场对材料进行快速硬度检测。 |
Vickers hardness tester The special hardness tester for aluminum alloy is very suitable for rapid hardness testing of materials on the production site. |
洛氏硬度计 用于现场精确测热处理后、淬火后的高硬度材料硬度。 |
Rockwell hardness tester It is used to accurately measure high hardness materials after heat treatment and quenching on site. |
维氏硬度计 广泛应用于测定微小、薄壁件、表面镀层硬度。 |
Vickers hardness tester It is widely used to measure the hardness of micro, thin-walled parts and surface coatings. |
邵氏硬度计D型 硬橡胶、树脂、压克力、玻璃、热塑性橡胶、印刷板、纤维等。 |
Shore hardness tester type D Hard rubber, resin, acrylic, glass, thermoplastic rubber, printing board, fiber, etc. |
二维码检查仪 可检精确测出二维码的识别等级。 |
QR code checker It can detect and accurately measure the identification level of QR code. |
高斯计 检测出永磁体表面磁场强度。 |
Gauss meter The surface magnetic field strength of the permanent magnet is detected. |
数显式推拉力计 又名微型压力仪最大只能承受5kg的推拉力,适用于小型弹簧、弹片的拉力测试。 |
Digital display push-pull meter Also known as micro pressure gauge, it can only bear 5kg push and pull force at most. It is suitable for the tension test of small springs and shrapnel. |
表盘式推拉力计 最大可以承受50kg的推拉力,适用于胶水附着力、销钉装配力、大弹簧的推拉力等。 |
Dial push-pull meter It can bear the maximum pushing and pulling force of 50kg, which is suitable for glue adhesion, pin assembly force, pushing and pulling force of large spring, etc. |
色差仪 标准色和样品色差数值数据分析,更直观的表现出颜色差异。 |
colorimeter The analysis of numerical data of standard color and sample color difference shows the color difference more intuitively. |
表面电阻测试仪 用于量化测量所有导电型、抗静电及静电泄放材料的表面电阻或系统电阻。 |
Surface resistance tester It is used to measure the electrostatic resistance and discharge resistance of all conductive materials. |
数显磁导率仪 测量具有低磁导率的材料和工件,如SUS316L。 |
Digital permeability meter Measure materials and workpieces with low permeability, such as SUS316L. |
镀层膜厚仪 用来专业测量电镀、阳极镀层厚度的标准仪器。 |
Coating thickness gauge instrument for professional measurement of electroplating and anode coating thickness. |
高温炉 测试材料、工件、胶水、磁铁等的耐高温特性。 |
High temperature furnace Test the high temperature resistance of materials, workpieces, glues, magnets, etc. |